Oracle Rangefinding Bow Sight

The Oracle laser-rangefinding bow instantly calculates and shows the exact aiming point for any distance and shot angle.

The Oracle will learn the trajectory or drop for two different arrow configurations and will accommodate up to 176 inches of drop at 100 yards. Most bow set-ups will be able to achieve 80-110 yards depending on bow speed and arrow weight.

The Oracle bow sight automatically detects when the sight is mounted for a left-handed bow and reverses the LED readout.  One CR123 battery powers the sight for 1,000-2,000 cycles.

MSRP: $799.00 

The Oracle is SOLD OUT through Fall of 2020 - Check your local retailer

OR

Burris Factory refurb model available HERE for $599. 

View Factory Refurb

 

Specifications

Item Number
Description
Weight
Battery
Battery Life
Laser to Reflective Target
Laser to Deer
Operating Temperature
Storage Temperature
Reticles
300400
Laser Rangefinding
17 oz
CR123
1,000 to 2,000 activations
500 yards
200 yards
-10F to 140F
-40F to 158F
Name
Burris Oracle Troubleshooting Guide
Type
 PDF
Modified
October 29, 2018
 
Name
Burris Oracle Quick Tips and Tricks
Type
 PDF
Modified
October 29, 2018
 
Name
Full Oracle User Guide
Type
 PDF
Modified
October 29, 2018
 
Name
Oracle Quick Setup Guide
Type
 PDF
Modified
October 29, 2018
 
Name
2020 Burris Optics Catalog
Type
 PDF
Modified
February 10, 2020
 
August 7, 2018

Setting up an Oracle Bow Sight

A series of videos designed to help set up the Oracle Bow Sight

Read More
Oracle Rangefinding Bow Sight is rated 4.4 out of 5 by 15.
Rated 5 out of 5 by from Impressive I had to be one of the first to get my hands on this sight. Have been hoping for a sight like this for years. It did not disappoint. Easy to install and sight in like most other quality sights. Aligning the laser took a bit more time and draws than I would have guessed, but with a little patience is pretty straight forward. Calibrating the trajectory to my setup was a slam dunk with just a dot difference than the preloaded setup. It is awesome to just draw, range and shoot from any yardage fast and accurately. If you can swallow the price tag you will likely get instantly addicted like me.
Date published: 2018-07-30
Rated 5 out of 5 by from Spot on! I must admit, I am a huge skeptic when new archery gear comes along. I must have 100% confidence in my gear or it stays at home. This seemed too good to not try out. I got the sight set up and dialed in within one evening, although you must draw your bow a fair number of times to get dialed in. Putting it to the test I shot at random distances and angles from 10-70 yards, wow. Just wow. I love the fixed 20 yard pin and vertical bar which just gives me more confidence the pin is exactly where it needs to be. You can tell it was designed by a hunter. It saves the time and movement of checking your rangefinder before drawing. This will be money during the rut when the bucks don’t sit still.
Date published: 2018-08-09
Rated 5 out of 5 by from Unbelievable The Burris Oracle is by far the best archery sight I have ever used. I'm the kind of guy that typically sticks with simplicity to reduce the risk of equipment failure but I had zero issues with the Oracle and its durability. I put it to the test last season in rain, snow and sub zero temps and it never missed a beat. The Oracle simplified the process of getting on target and boosted my confidence as a hunter. In one easy motion I drew my bow, ranged the target, adjusted to the new pin and let the arrow fly. There is no glass to fog up and a fixed 20yard pin even without batteries.
Date published: 2019-05-16
Rated 5 out of 5 by from AMAZING SIGHT I have a problem seeing and this sight with the green lights is very bright and easy to see inside and outside in the bright sunlight. It was easy to set up there are so many videos out about setting it up just pay attention to what they tell you. Great sight and great customer support job well done.
Date published: 2018-12-05
Rated 4 out of 5 by from Oracle Bow Sight I have been target shooting with this sight for 4 or 5 weeks. I really like the range finder being built right into the sight. Can't wait to use it while hunting. I would like to see a couple of upgrades. 1. Be able to save the setting on the brightness of the sight dot. This should be an easy upgrade. 2. Add some type of cross hairs to the sight. Maybe halfway down the sight bar. Would not need to go all the way across. Just something to help visually eliminate bow tork. Because at longer distances a little tork will have a big impact on accuracy. 3. Instead of having to squeeze the activation button twice to get a range. It would be nice to just be able to hold the botton down a little longer to get a reading. Less motion, less stress and less movement in the sight window. Otherwise I love the sight. Not having to think about weather you need to shoot a little low or high depending on the range compared to you sight pins is a real plus.
Date published: 2019-08-22
Rated 4 out of 5 by from Awesome unit! Have had this for a month now, was very easy to set up and sight in. I totally agree with the other review about the default pin brightness. It’s easy to turn down but goes back to being too bright after 90 seconds then you need to turn it down again. Would have given this 5 stars + if not for that. Still would highly recommend this unit with its forever warranty!
Date published: 2019-07-30
Rated 2 out of 5 by from Love the idea and I want it to work.., I am going on another elk hunt this fall and debated upgrading my Matthews no cam. I went to Local shop and instead decided to try the new Oracle. I have spent two weeks trying to give it a fair shot. I followed the video to a T. I calibrated with the laser, calibrated my setup for distance 1 and 2 (and of course 20 yard pin). However I keep getting erroneous distance readings and I have been very careful to line up the back site with the twenty pin on target for distance reading. I went back and rechecked with the laser beam and it seems a to move from just right so I adjusted it back but still errors. It seems to over estimate the first reading by about 10 yds, so I push again and second time is often correct. However I can’t afford to attempt multiple readings. Please help, I love the concept but have no confidence right now! I am about to return it but hoping for answers before giving up.
Date published: 2020-03-29
Rated 4 out of 5 by from Only one flaw This sight has exceeded my expectations except for one major flaw. At dawn or dusk, the critical time for deer movement you have to adjust the light to a lower setting. It is too bright. It needs to be the opposite. At these times it is difficult to find the down button. If opposite, there is plenty of light to see adjustments otherwise great tool.
Date published: 2019-12-19
  • y_2020, m_10, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_505, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_burrisoptics

Trajectory calibrating,once set up and saved can you come back to SR2 and fine tune just this one the next day? Does the unit save the adjustments you made even if you go back into setup mode or do you need to start from the beginning?

Asked by: Mack61
Hello, Yes just be sure to range the exact same distance as you did for your SR1, then SAVE to move on to SR2.
Answered by: Burris Support
Date published: 2020-06-13

How the rain will affect the sight? if it gets wet. Also, what about hunting from an elevated position, does it calculate the angle?

Asked by: rider4799
Hello, The sight can be used in the rain, but heavy downpours could affect the range finder. If that happens, you can try wiping the range finder lens with a cloth to dry it. The Oracle does have a built in inclinometer to compensate for angles.
Answered by: Burris Support
Date published: 2020-05-22

Will this sight work on any bow ? I have a Matthews heli?

Asked by: Matt04
Hello, It should work no problem on your Matthews Heli.
Answered by: Burris Support
Date published: 2020-06-30

If using a tent will the range finder work through the mesh

Asked by: Darren
Hello, If you try to range through mesh it will not work. The beam must go straight to the target to properly range.
Answered by: Burris Support
Date published: 2020-05-04

If I sight in my whitetail arrow at 20 yards and use the AS1, when I sight in my heavier Elk arrow at 20 yards and use the AS2, must I manually move the sight to get the 20 yard pin before calibrating the AS2 ranges?

Asked by: DL Archer
Hello, Yes you will need to move the 20 yard pin.
Answered by: Burris Support
Date published: 2020-04-17

I have a peep sight on my bow. Is it best to use the peep sight or just the add on sight ring that came with the Burris rangefinder sight? Is the bigger size peep the best to use?

Asked by: chris77
Hello, The Oracle peep is specifically designed for use with the Oracle. I would recommend using ours during the initial setup, and after you have the bow set up completely you could try your other one and see how they compare.
Answered by: Burris Support
Date published: 2019-11-06

So when you flip it for left handed use. How do you put the bubble/level to the bottom? Using a sight with the bubble on top doesn’t work well! 

Asked by: Jody M
Hello, The bubble level is still entirely functional when rotated for left handed use.
Answered by: Burris Support
Date published: 2020-08-01

Will this work on crossbows?

Asked by: HARRISON
Hello, The Oracle will not work with any crossbows.
Answered by: Burris Support
Date published: 2019-10-11
  • y_2020, m_10, d_25, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_en_US, sid_505, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_burrisoptics
Search Close

Search form