Oracle 2 Mail-In Rebate: More Information

FastFire™ RD

Find a Dealer

  • FastFire RD (Rifle Dot) features a 2 MOA red dot
  • AAA battery offers extended battery life
  • Fits Picatinny rails
  • Brighter dot
  • Rugged alloy housing is impact resistant

MSRP: $299

Specifications

Item Number
Description
Reticles
Reticle Color(s)
Kit
Combo Package
Magnification
Clear Objective Lens Diameter
Finish
Field of View
Mount
Close Focus
Eye Relief
Click Value
Height Above Rail to Optic Centerline
Elevation Adjustment, Total Capability
Windage Adjustment
Parallax/Focus
Length
Weight
Illumination Control
Illumination Settings
Battery
300260
2 MOA Red Dot
Red
no
None
-
35.5 mm
Matte
-
Picatinny
-
Infinite
1 MOA
-
90 MOA
90 MOA
-
2.8 in.
6.4 oz.
-
-
AAA
FastFire 4 MOA Red Dot Sights
View More Models
  • User GuidesGuides
Name
FastFire 4 Manual
Type
 PDF
Modified
July 30, 2021
 
Name
FastFire 2 Manual
Type
 PDF
Modified
February 6, 2020
 
Name
FastFire 3 Manual
Type
 PDF
Modified
October 29, 2015
 
Name
2020 Burris Optics Catalog
Type
 PDF
Modified
February 10, 2020
 
FastFire™ RD is rated 4.1 out of 5 by 513.
Rated 5 out of 5 by from Couldn't Be Happier I love my fastfire 3. As soon as Burris placed the battery where it could be removed without removing the sight I was sold. Its low profile and handles the abuse of my shotgun. My only complaint is when its time to turn the sight off you have to click the button through all of its settings before it can be turned off. It only has 4 settings but that is a just more times a button gets pushed. Also the lowest brightness setting is last and hard to see the dot on bright day and you could think you have it turned off. I feel It should have a hold down 5 seconds to turn off and thats the only thing I would change. Its outstanding otherwise. Thanks Burris for the greatest customer service ever
Date published: 2015-03-17
Rated 4 out of 5 by from old eyes young again I bought a Fastfire II and Burris rear site dovetail base for my Ruger mark II pistol. My eyes are not young any longer and I could not be confident of hitting my targets with the sights on my pistol. The FastFire solved that problem in a very satisfying way. I liked the sight on the.22 so much, I bought another to mount on my Redhawk 44 mag. The FastFire has worked out just as well on the revolver as it has on my .22 pistol. Took the Redhawk deer hunting and shot 2 deer using the FastFire. It was an awesome experience. I'm very pleased with this sight, though not having to remove it from the mounting base to change battery would be nice.
Date published: 2015-11-23
Rated 5 out of 5 by from takes a licking and keeps on ticking Ifbought my fast fire six months ago. It sighted in as easy as any other red dot I have and is bright enough for any condition I have been in. When I was at my gun club last week the rifle that my ar-f3 was on feel out of the gun rack when I was at the bench shooting another rifle. The rifle with the ar-f3 on it fell about 4 feet and landed on concrete hitting the ar-f3 first. One of the protective wings was slightly bent in. Other than that the sight held zero and is working fine. I can't find any torture test reviews online for the fast fire 3 but if it can take that abuse and hold zero and work just fine I think that is all I can ask of a red dot sight to hold up to
Date published: 2015-09-16
Rated 5 out of 5 by from Tough little sight Simply put, this is an outstanding sight, especially for the money. I bought two; one for a Beretta Neos (with a non-moving rail), and one for a Glock 34. I was most concerned about the one which would be "riding the slide" on the Glock with regard to durability. My concerns were unfounded. Both sights have functioned perfectly. You'd expect the one on the .22 pistol to be fine, and it has. So has the one on the Glock. No blinking, no turning off, has held zero perfect through 450 rounds so far. I did take to care treat all screws with Loctite and to let it cure for a full 24 hours before shooting. I'm very glad I didn't buy more expensive red dots; there was absolutely no need. The lifetime warranty sealed the deal.
Date published: 2015-02-27
Rated 5 out of 5 by from Excellent product/value Bought this on Amazon to complement the AR 536 which is mounted on my Windham AR-15. It is very light weight and doesn't add much bulk to the sight. It is very well made. The auto brightness feature works very well and the windage and elevation are easily edjusted using a thin blade screwdriver. I read several reviews on the FastFire II and the biggest complaint was that you had to remove the sight to get to the battery compartment. The FastFire III has the battery compartment on top and that's why I chose that modle. I have fired approximately 500 rounds since adding the optic and it has held zero. I am very satisfied with this purchase and would recommend this to a friend. I could have spent more on another brand but so far I don't see the need.
Date published: 2015-05-20
Rated 5 out of 5 by from Great product Fits great on my Glock 35 M.O.S. I love the fact that it's small without being to small. The battery door on top is really nice, and sighting it in was quick and painless. Before I seen the Fastfire 3 I was about to purchase one that was over double the price. I had been looking for days trying to find a reflex sight for my new pistol. I was at my last store when I seen it in the case. I fell in love with it right away. It had all the features with half the price. If your looking for a reflex sight for home defense, and target shooting look no further then the Fastfire 3. It will not disappoint.
Date published: 2016-02-24
Rated 5 out of 5 by from Perfect co-witness on M&P Core I installed the Burris Fastfire 2 Red Dot in 15 minutes and within 20 had it It co-witness with no issues on a M&P core Ported 40 cal. 5 inch barrel. The main thing to remember when adjusting the sights is do do exactly what the instructions says to do. Loosen the locking screws by half a turn this will allow you to adjust the sight on the gun take it off with out any movement on the screws while you tighten back the locking screws. This sight is very small and easy to use. It is the same size as the Doctor red dot. The quality is great and I found no issues with the workmanship. The clarity of the lens is incredible. It comes with lifetime warranty and for under $200 I see no reason to spend money on optics that cost half of the gun. I really like that it has an off and on switch which is what I wanted. Tips for Co- Witness
Date published: 2016-01-03
Rated 5 out of 5 by from FastFire III/MTAC combination for the AR-15 A little over a year ago, I bought a Burris MTAC scope for my AR that came bundled with the FastFire red dot. Owing to family and work obligations, I didn't have the opportunity to really evaluate the system until quite recently. The scope was great, but I couldn't reliably turn on the FastFire, and it would often turn off with recoil. Not good. So I contacted Burris, concerned about a year having gone by. Burris immediately suggested I return the FastFire for evaluation and repair, preparing me for a several weeks turn around time. In a little more than a week, a new FastFire was returned to me (at no charge), and this one functions perfectly. I am very satisfied with the scope/dot combination. The quality and performance is top notch.
Date published: 2014-10-08
  • y_2021, m_9, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_46, tr_467
  • loc_en_US, sid_735, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_burrisoptics

What are the Fast fire 2 dimensions 

Asked by: Jim7620
Please email us at customerservice@burrisoptics.com and we'll forward them over to you.
Answered by: Burris Support
Date published: 2021-09-21

How wide are the different models of the Fastfire 3?

Asked by: Dafttar
They're all the same width. 1.0025"
Answered by: Burris Support
Date published: 2021-09-14

Is the Burris fastfire 2 the same mount and footprint as the fastfire 3? Do all the screw holes line up the same?

Asked by: McHvac
They're the same footprint and they'll line up. No problem.
Answered by: Burris Support
Date published: 2021-09-14

Is the FastFire 8-MOA Dot compatible with the CZ P-10s (optic ready) If so what mounting plate should I order? Thanks

Asked by: BrianHS
Our optic is compatible with plates using the Docter/Noblex footprint.
Answered by: Burris Support
Date published: 2021-09-14

Which model will fit fo a BERETTA M92 A1?

Asked by: Huno
Item 410324 will fit the M92A1. A side note, this mount is not compatible with the A3 handguns.
Answered by: Burris Support
Date published: 2021-09-03

I want to mount a Fastfire 3 on a Glock, using the MOS system. What sort of mount do I need?

Asked by: Stinky
You'll need plate one and the supplied flush plate screws from your Glock. Here is some more information: https://www.burrisoptics.com/sites/default/files/generated/glockfastfire3installsheet_v2.pdf
Answered by: Burris Support
Date published: 2021-09-03

Hi, when is the fastfire 4 available in France? is the weather shield made of metal or plastic? and is its window made of acrylic or real glass? Thanks

Asked by: Pierre07
Hello, Thanks for your interest in the FFIV. We shipped a large order to France recently. Here is the dealer I recommend contacting: HUMBERT 45, avenue Paccard 42340 Veauche Telephone: 04 77 52 77 52 Telefax: 04 77 52 77 53 email: info@humbert.com www.humbert.com
Answered by: Burris Support
Date published: 2021-09-03

I have recently Puchased a Fastfire Red Dot from Optics Planet . It is impossible to get the battery cover on . Is this a common issue ?How can I get a replacement Battery Cover as I buggered it up . Never seen anything like this. Thanks , Mike Kobetich

Asked by: THECROW
I'd recommend trying an Energizer battery, as they are more in spec. We had a batch go out with batteries that were out of spec and caused threading issues. I'd try the new battery and definitely let us know if you need a replacement cap. Additionally be sure to not use the blue adjustment screwdriver for the installation as it is too small. If you need a new cap please go here: https://burris.supportsync.com/
Answered by: Burris Support
Date published: 2021-08-31
  • y_2021, m_9, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_871
  • loc_en_US, sid_735, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_burrisoptics
Search
MENU
Close

Search form

My Account Find A Dealer International Dealers Customer Service