Eliminator III 4-16x50mm with remote cable and enhanced software

Find a Dealer

The Eliminator III 4-16x50 Model 200119. This model of Eliminator has all of the same features as the "regular" Eliminator, PLUS it features a remote cable and it also has enhanced ballistic software. It not only works for centerfire cartridges, but will now work on most rimfire, muzzleloader and slug guns as well.

The remote cable is a wired PTT-style cable, using the same battle-proven design as switches on military-grade tactical gear. If you choose not to use the PTT cable, the buttons on either side of scope function as normal.

Built-In Laser Rangefinder: Laser range capability out to 1,200-plus yards with reflective target, 750-plus yards with non-reflective target.

Automatic Trajectory Compensation: Push the button and a bright-red, illuminated dot signifies your new aiming point.

Easy Programming: The Eliminator III comes with a programming book, and there is a web site app to help get the precise programming numbers you need based on your elevation, atmospheric condition, and cartridge of choice. Check it out here.

Suggested Retail Price: $2,039


Item Number
Knob Style
Objective Lens Diameter
Clear Objective Lens Diameter
Ocular Lens Diameter
Focal Plane
Main Tube Size
Field of View
Eye Relief
Exit Pupil
Click Value
Elevation Adjustment, Total Capability
Windage Adjustment
Adjustable Parallax
Illumination Control
Illumination Settings
Remote Cable/Upgraded Software
Matte Black
Capped Hunter
65 mm
50 mm
42 mm
26 - 7 (ft at 100 yards)
3.5 - 4 in.
12.5 - 3.1 mm
1/8 MOA
40 MOA
40 MOA
Objective PA
50 yards -infinity
15.5 in
30.4 oz
5 brightness settings


Model Number 200119:

Eliminator III Model #200119 has some big changes over the other Eliminator III models:

It features a Remote Cable Switch to activate the On/Range button from any position the shooter desires.  The cable can be attached to either side of the Eliminator. The cable is a flexible coil, and has a length of 14-24 inches to accomodate various mounting positions.

Model #200119 is also compatible with muzzle loader and low velocity cartridges (.300blk, rimfire, etc.).  You are able to select 50 or 100 yard zeros.  The model #200119 is the only current Eliminator model with these abilities.

NOTE: It is not possible to alter or upgrade other Eliminator models to use the Model #200119 features. The remote cable is not available separately, and will not work on other models (it replaces the current mechanical switch with an electronic signal, which required an entirely new internal circuit system).

Eliminator III Features:

Built-in rangefinder allows you to range your target without carrying additional equipment
Laser range capability out to 1,200-plus yds. with reflective target, 750-plus yds. with non-reflective target
 Calculates the perfect holdover at your exact distance; push the button and a bright-red dot shows your new aiming point
Integrated inclinometer adjusts for any angle on uphill or downhill shots, for greater accuracy
Features the sophisticated X96 Reticle


Trajectory compensation works on any power
Range your target in yards or meters—your choice


Reticle displays a 10 m.p.h. wind value to indicate wind hold-off for your specific cartridge at the indicated range to target
Wind Value represents how many dots to hold into the wind for a 10 m.p.h. crosswind; the shooter estimates actual wind speed and uses the Wind Value as a guide to determine the number of dots to hold into the wind


High-grade optical glass provides excellent brightness and clarity with lasting durability
Quality, precision-ground lenses are larger than comparable scopes, for better light transmission
Index-matched, Hi-Lume® multicoating aids in low-light performance and glare elimination, increasing your success rate


Integrated scope mounts allow quick easy mounting on any Weaver or Picatinny base
A double, internal-spring tension system allows the scope to hold zero through shock, recoil, and vibrations
Positive, steel-on-steel adjustments ensure repeatable accuracy
Uses 1 CR123A battery that lasts through 5,000 range cycles
Parallax adjustment from 50 yds. to infinity
Guaranteed by the Burris Forever Warranty™

Eliminator III User Guide
July 13, 2021
New for 2022 | Burris Optics
May 23, 2022
Eliminator III 4-16x50mm with remote cable and enhanced software is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from As advertised Bought this scope to put on my Remington 7mm mag cdl. After putting in the correct numbers in the scope and zeroing it in at 100 yards here in Wyoming took it out on a antelope hunt glad I had it on my rifle as the antelope where very hard to close in on but when a shot did present it self it was at 661 yards useing a 175 Winchester round one shot behind the shoulder the buck never knew what hit him. My son was amazed he could wait for his shot as he is shooting the same gun and scope the 4x16x50 burris eliminator 3 is the real deal.
Date published: 2019-09-29
Rated 5 out of 5 by from Amazed at the accuracy. I have been gonna make this purchase for awhile now and finally committed with no regrets. I am amazed at the accuracy of this optic. Point, range and squeeze.
Date published: 2020-04-13
Rated 5 out of 5 by from Awesome... Bought this scope for my beloved Tikka T3x ss super lite .308 and combination is perfect, but after Burris weaver/ picadilly style rail. As it is recommended.
Date published: 2020-06-04
  • y_2022, m_11, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_696, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_burrisoptics

on the eliminator 3 how do you set up for a 50-yard zero when it is stuck on 100 yards

Asked by: aronford
Most Eliminator III scopes are not compatible with a 50 yard zero. If your unit has the remote cable it can be changed but in the majority of cases they are not compatible with a 50 yard zero.
Answered by: Burris Support
Date published: 2022-09-30

I own a Burris eliminator 3 200119. And lost my remote cable. How can I replace it?

Asked by: Newport1714
We are happy to send a new one out under warranty. Please go here to get started. https://burris.supportsync.com/
Answered by: Burris Support
Date published: 2022-02-03

Where can I buy a remote cable for my Eliminator 3 scope? The model I purchased did not come with.

Asked by: Tutti
If it did not come with the scope, then it unfortunately wont be compatible.
Answered by: Burris Support
Date published: 2021-12-01

Looking for drop number for a 300PRC with  Hornady wt grain 225 and 212,  Have nothing found them in the cartridge list fir that caliber 

Asked by: SeaBear
Answered by: Burris Support
Date published: 2021-10-21

I have a Burris 4x - 12x ballistic lazer scope with the designation ALF100589 on the botto probably 10 years old. I seem to have lost the instruction manual with the info on ammunition and how to operate it. My question is: Where can I get it?

Asked by: Reindeerhunter
Please reach out to our customer service team at customerservice@burrisoptics.com for a new user guide.
Answered by: Burris Support
Date published: 2021-10-13


1/2" picatinny riser.
Answered by: Burris Support
Date published: 2021-06-14

I have the Eliminator III. I’d like to get the remote cable or the wireless for it. Is there a kit or something I could get for mine to add the remote cable? 

Asked by: blackie_dan
If it did not come with the remote cable, it will not accept it. Only one model came with that and the other ones are not able to be adapted unfortunately.
Answered by: Burris Support
Date published: 2021-06-07

Does the scope work at night

Asked by: Lamar
The scope itself will perform as an optic but at night you will lose rangefinding capabilities.
Answered by: Burris Support
Date published: 2021-05-24
  • y_2022, m_11, d_27, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_696, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_burrisoptics
Search Close

Search form