Fullfield TAC30 Riflescope 1-4x24mm

The Fullfield TAC30™ is the most cost-effective tactical scope and tactical kit Burris provides. The TAC30 offers a very wide field of view, and 1x magnification at the lower end - making for easy, fast target acquisition. The 4x full zoom and Ballistic CQ reticle make shots out to about 300 yards very practical.  

The illuminated center dot and large, bright circle allow for instant target engagement at close distances. 

The ultra-bright, illuminated reticles have a 10-position dimmer you can adjust for all lighting conditions. TAC30 uses a pushbutton switch which allows for easy cycling back and forward through the brightness settings. It’s fully compatible with night-vision technology.

The TAC30 is available in a combo with the popular FastFire™ 3 red dot sight and 30 mm AR-P.E.P.R. Mount

The Fullfield TAC30 Riflescopes Series is covered by the Burris Forever Warranty™.

Suggested Retail Price: $359 - $599

Compatible Reticles

Ballistic CQ™
Designed for competitive shooting and tactical situations

Available On: Fullfield TAC30
Learn More

Specifications

Item Number
Description
Reticles
Kit
Color
Knob Style
Illumination
Magnification
Objective Lens Diameter
Clear Objective Lens Diameter
Ocular Lens Diameter
Focal Plane
Main Tube Size
Field of View
Eye Relief
Exit Pupil
Click Value
Elevation Adjustment, Total Capability
Windage Adjustment
Parallax/Focus
Adjustable Parallax
Finish
Length
Weight
Illumination Control
Illumination Settings
Battery
200433
Scope alone
Ballistic CQ™
no
Matte Black
Capped Tactical
yes
1-4x
30 mm
24 mm
42 mm
RFP
30 mm
100 low – 32 high (ft. @ 100 yds.)
3.5 – 4.0 in.
24 low – 6 high (mm)
1/2 MOA
130 MOA
130 MOA
Matte
11.3 in.
17.0 oz.
Push-button
10 brightness settings
CR2032
200433-FF
Tactical Kit
Ballistic CQ™
yes
Matte Black
Capped tactical
yes
1-4x
30 mm
24 mm
42 mm
RFP
30 mm
100 low – 32 high (ft. @ 100 yds.)
3.5 – 4.0 in.
24 low – 6 high (mm)
1/2 MOA
130 MOA
130 MOA
Matte
11.3 in.
25.0 oz.
Push-button
10 brightness settings
CR2032
Close Quarter Tactical Kits
  • The fast-action Ballistic CQ™ reticle was designed for competitive shooters and law enforcement and military operators 
  • Circular center provides ultra-fast engagement at close distances
  • Smaller reticle dots provide trajectory compensation out to 600 yds. for the 5.56 and 7.62 cartridges
  • Digital dimmer switch lets you choose from 10 intensity settings for your illuminated reticle
  • 1-4x power magnification; 1x provides super-wide field of view for both-eyes-open shooting; 4x lets shooter engage out to 600 yds.
  • Index-matched, Hi-Lume® multicoating aids in low-light performance and glare elimination, increasing your success rate
  • Illuminated reticle reduces time to get on target in any lighting condition and increases accuracy when target is dark
  • Illuminated reticle is compatible with night-vision technology
  • Double internal spring-tension system allows the scope to hold zero through shock, recoil, and vibrations
  • Waterproof
  • Nitrogen-filled scope tubes prevent internal fogging, even in cold and rain
  • Precision-gauged and hand-fitted internal assemblies maintain a consistent point of impact regardless of shock and vibration, and hold true through magnification range
  • Durable, stress-free, solid 1-piece outer tube withstands shock and vibrations of even the heaviest-recoiling calibers
  • Guaranteed by the Burris Forever Warranty

 

Name
2019 Burris Optics Catalog
Type
 PDF
Modified
January 3, 2019
 
Fullfield TAC30 Riflescope 1-4x24mm is rated 4.0 out of 5 by 62.
Rated 5 out of 5 by from On Point Fastfire mounted on my AR-15 very easy and mount very sturdy. Very quick to get on target and sited in in only two shots. Endures pounding in my cruiser and still dead on when checked. Glad I chose this scope.
Date published: 2014-10-14
Rated 1 out of 5 by from Push button is junk I bought this scope about a month ago and when I received it I put the battery in it and the reticle came to life. Going through the setting was a breeze with the push button, that is until you get the scope on the gun and out in the real world. The push button does not work at any temperature below normal room temperature. While I was at the range sighting it it I could not cycle through the brightness settings. It would turn on on the cold but as soon as you wanted to change brightness it would do nothing after the first press and the second press would shut it off. I wish this thing had a turret style knob instead of a push button.
Date published: 2019-01-20
Rated 5 out of 5 by from Zeroed out of the box I was debating this against a Vortex Viper 1-4, which was about $60 less, to mount on an LWRC SPR. I ultimately, obviously, chose the Burris for a couple reasons. A couple of my friends have this setup and they didn't have complaints plus it has a red dot. I mounted it and went to an outdoor range fully expecting to spend some time dialing it in. Remarkably, absolutely NO adjustments needed to be made. I couldn't believe it! This thing was zeroed right out of the box. It's tough, too. A buddy that was with me accidentally dropped the rifle and it landed on the scope. Keep in mind this is the first day out with it, too. It got a pretty good scuff on it after falling about 5 feet but the glass stayed true and the FastFire 3 didn't budge either. For $500ish, for fast acquisition, good glass, for a tank of a scope, you pretty much cannot go wrong.
Date published: 2015-02-26
Rated 3 out of 5 by from Firdt One Was a Dud I purchased the unit at Bass Pro, two days later I loaded the batteries. The red dot worked great, but the scope was defective. When loading the battery, it turned on. Once loaded however, there was no brightness adjustment on the illuminated reticle and the unit would not turn off (the auto shut off did work). Once off, the unit would not turn back on unless you took the battery out and re-inserted it. Bass Pro to the rescue, I took the unit back and, even though I had to accept a counter display model, it works perfectly. I haven't sighted the unit in yet but it appears to be solid (with a great Burris guarantee) so I'm looking forward to hitting the range.
Date published: 2016-03-01
Rated 3 out of 5 by from Very functional Upon receipt of the scope and mount, the rear mounting nut on the AR-P.E.P.R. mount would not tighten to the listed torque value of 65 in-lbs. Burris quickly replaced both the nut and stud, which tightened to the listed torque value. Customer service was prompt and courteous. After finally shooting with the scope, the TAC30 proved to be very accurate at 100yds. The Fastfire red-dot was accurate out to 25yds, but difficult to shoot at greater distances. All of the adjustment knobs were accessible and easy to use with pronounced "clicks." I was, however, a little disappointed that the TAC30 did not ship with any protective-optic covers. All of my other scopes contained protective covers.
Date published: 2015-11-30
Rated 5 out of 5 by from Great sights This was my 3rd sight set up, after using an ACOG while in the Army, I purchased an EOTec to use on my personal rifle. Hated it so much so when I sold that I got the Tac-30 as a recommendation from a buddy and loved it! Great for quick acquisition, the reticule is bright and sharp, and the weight is easy to manage. Got the product fast and have been extremely happy with it since!
Date published: 2014-10-08
Rated 1 out of 5 by from Push button is garbage - reticle ring is too thick I purchased this scope to mount on my M4. It mounted easily and secure. Installing the battery and attempting to use the illuminated reticle was a total disappointment. The detent button would not function at all. I boxed it up Andre returned it for service. More disappointment when I received it back. There was nothing in the box, describing the problem and what corrective measures were taken to repair the issue? Really? I’m convinced, (after reading many reviews) that this problem is manufacturing defect that Burris plain fails to correct. Unacceptable in Munich book, and I won’t need their 20% off coupon. Burris won’t receive another dime of my scratch.
Date published: 2019-02-22
Rated 2 out of 5 by from Waiting on customer service!!!! I bought the tac30 scope to complement my new bushmaster 223 rifle. I purchased this online from cabelas and as soon as I opened the box I knew something wasn't right. First of all it didn't take a Guinness to figure out this product had already been opened or possibly returned and sold again. But that being said, without mounting yet the optics look great. The only issue I have is with the battery install on the scope itself. Direction are a bit vague and it seems like the metal tabs where you install the battery either get in the way or simply try to fold over. I've tried emailing the company about this issue, but haven't been given a response yet. Hopefully I will get this resolved soon.
Date published: 2018-05-04
  • y_2019, m_9, d_17, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_59
  • loc_en_US, sid_152, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_burrisoptics

Hey guys, just wanting to know if this scope is suitable for a 30-06 rifle? Need a new hunting scope other one is broken. Thanks.

Asked by: Milesy
Hello, Yes! You can absolutely use it on a 30 06. Recoil will not be a problem, we rate all of our optics beyond .50BMG in both directions of recoil.
Answered by: Burris Support
Date published: 2019-08-29

How do you turn the red dot off and save the battery?

Asked by: Joey 65
Hello, The Fastfire is operated by a push button power switch. There is an Auto setting, High, Medium, Low, and Off.
Answered by: Burris Support
Date published: 2019-07-31

at what distance is the parallax set for 100 or 200 yards on the model 200433

Asked by: jslara
Hello, On that scope parallax is set at 100 yards.
Answered by: Burris Support
Date published: 2019-07-30

Will this fit on an m4 with fixed front sight or do I have to get spacer blocks

Asked by: Driller51
Hello, It will work just fine with the fixed FSB on your AR. No additional spacers or risers are necessary.
Answered by: Burris Support
Date published: 2019-07-25

I wish to utilize this scope on a Ruger 308 scout rifle. Is this scope compatible with that cartridge? Is that what 30 means? I see in the Natchez catalog this scope designated that way and with a 1 in in front of it.That said, in the pricing it is 556.

Asked by: Stephen D
Hello, The "30" indicates that the scope has a 30mm main tube.
Answered by: Burris Support
Date published: 2019-05-21

What radicle does the XRT II have?

Asked by: Bruce52
XTR II scopes come in several different reticles. Here is a link to the 1.5-8 section. https://www.burrisoptics.com/scopes/xtr-ii-riflescopes-series/xtr-ii-riflescope-1.5-8x28mm
Answered by: Burris Support
Date published: 2019-03-19

where is the serial number located

Asked by: Stone
Hello, The serial number is located on the bottom of the turret housing. It could be difficult to see if the optic is still mounted.
Answered by: Burris Support
Date published: 2019-01-17

What is part number for the xtr ll 1.5-8x28 mm tactical kit?

Asked by: Greg D
201015
Answered by: Burris Support
Date published: 2019-01-09
  • y_2019, m_9, d_17, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_91
  • loc_en_US, sid_152, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_burrisoptics
Search Close

Search form