Laser Range Finding: Eliminator LaserScope
EU - Ballistic Laserscope III LaserScope 4-16x50mm
Find a Dealer
- Built-In Laser Rangefinder
- *All models now accommodate for Muzzleloader, Rimfire and Slugs
- Laser range capability out to 1,200-plus yards with reflective target, 750-plus yards with non-reflective target.
- Automatic Trajectory Compensation: Push the button and a bright-red, illuminated dot signifies your new aiming point.
- Easy Programming: The Ballistic Laserscope III comes with a programming book, and there is a web site app to help get the precise programming numbers you need based on your elevation, atmospheric condition, and cartridge of choice.
Objective Lens Diameter
Clear Objective Lens Diameter
Ocular Lens Diameter
Main Tube Size
Field of View
Elevation Adjustment, Total Capability
26 – 7 (ft. @ 100 yds.)
3.5 – 4 in.
12.5 – 3.1 mm
50 yds. – infinity
5 brightness settings
- Built-in rangefinder allows you to range your target without carrying additional equipment
- Laser range capability out to 1,200-plus yds. with reflective target, 750-plus yds. with non-reflective target
- Calculates the perfect holdover at your exact distance; push the button and a bright-red dot shows your new aiming point
- Integrated inclinometer adjusts for any angle on uphill or downhill shots, for greater accuracy
- Features the sophisticated X96 Reticle
- Trajectory compensation works on any power
- Programming works with centerfire rifles only. See model 200119 for options beyond centerfire cartridges.
- Range your target in yards or meters—your choice
- Reticle displays a 10 m.p.h. wind value to indicate wind hold-off for your specific cartridge at the indicated range to target
- Wind Value represents how many dots to hold into the wind for a 10 m.p.h. crosswind; the shooter estimates actual wind speed and uses the Wind Value as a guide to determine the number of dots to hold into the wind
- High-grade optical glass provides excellent brightness and clarity with lasting durability
- Quality, precision-ground lenses are larger than comparable scopes, for better light transmission
- Index-matched, Hi-Lume® multicoating aids in low-light performance and glare elimination, increasing your success rate
- Integrated scope mounts allow quick easy mounting on any Weaver or Picatinny base
- A double, internal-spring tension system allows the scope to hold zero through shock, recoil, and vibrations
- Positive, steel-on-steel adjustments ensure repeatable accuracy
- Uses 1 CR123A battery that lasts through 5,000 range cycles
- Parallax adjustment from 50 yds. to infinity
- Guaranteed by the Burris Forever Warranty™
Eliminator III Quick Start Guide
October 29, 2015
Eliminator III Cartridge List
March 18, 2015
Eliminator III mounting plate guide
October 29, 2015
2020 Burris Optics Catalog
February 10, 2020
EU - Ballistic Laserscope III LaserScope 4-16x50mm is rated out of 5 by 201.
Rated 5 out of 5 by Nodakian from Solid tracking Matched with an AR10 308,few shots consistent tracking right out of the box! Havnt had the oppertunity for long range shooting yet, but this scope showing its built properly be for i had even touched the electronics. The electronics portion very simple to figure out. From what i can tell im excited to get out and try my luck with the longer ranges. My suggestion is read the 10pages of the owners manual (15 min of reading) take the time to know how your bullet acts and velocity, elevation makea a difference also! Call the tech line and the people are awesome. In short without long range training im very confident
Date published: 2015-12-29
Rated 5 out of 5 by BGibbs from Exceeded Expectations I mounted the Eliminator III on my new 300RUM and went to the range. The scope zeroed quickly and consistently at 100 and the ballistic table included with the scope provided the correct drop and ballistic coefficient for my specific ammo. I shot accurately out to 500yds. The scope easily ranged targets past 1000 yds. but 500 is my max for ethical hunting. Entering the drop number and BC is much easier than I expected. Fast forward to Wyoming in October. I used the instructions provided to adjust my drop number and BC for the 6,000 ft. change in elevation from my home in TN to Cody, WY. After confirming that the adjustment was dead on we went to the field. I harvested an antelope at 407 and a mule deer at 112. Both shots were right behind the shoulder. I simply pushed the button and the scope provided the correct holdover dot. Using a separate range finder, counting mill dots or clicks and then acquire the target takes time that you often don't have in a hunting situation. The Eliminator III eliminates those steps.
Date published: 2015-02-25
Rated 4 out of 5 by LES MYKITA from GREAT FIELD AID TO CONFIRM THAT LONG SHOT OVERALL GREAT SCOPE BOUGHT THE FIRST B.E. MOD 1 AND THEN RECENTLY BOUGHT A SIMILAR B.E. FOR MY SONS HOWA `1500 IN 223 ONLY CRITISM I WOULD MAKE AS A CONSTRUCTIVE FEEDBACK IS FOR BURRIS TO CONSIDER MAINTAINING A 25.4MM 1 INCH TUBE NEAR THE BACK OF THE SCOPE TO BE ABLE TO MOOUNT A SCOPE MOUNTED SPOTLIGHT CURRENTLY THERE IS NO WAY I CAN SHOOT AT NIGHT WITH A SPOTLIGHT ATTACHED TO IT AS THE SHAPE OF THE SCOPE IS ELONGATED AND I AM NOT AWARE OF ANY MODS AVAILABLE TO RETRO FIT A SPOTLIGHT (OTHER THAN AN OLIGHT TYPE MAGNETIC TORCH) WHICH WE TRIED BUT NOT ABLE TO TAKE LONG SHOTS GREAT SCOPE THANKS PETE MELBOURNE AUSTRALIA
Date published: 2019-03-16
Rated 5 out of 5 by AlaskaShooter from Fast and accurate Zeroed the scope at 100 after entering my ammunition information. Ranged a small steel plate at 327 yards, adjusted to the point the Eliminator III displayed and pulled the trigger. Dead center shot within a few seconds. No fiddling back and forth with a range finder, no turret adjustments, just tap, adjust, shoot. Quite often a person's window of time for the shot on game is available but for a few precious seconds after weeks worth of work. With any other system, the animal has time to disappear or get turned. Several times I've taken game there is not time for anything BUT what only the Eliminator III can provide. The mount is more solid than any scope made, rail to rail. There's zero chance of knocking it out of alignment. The optics are distortion free. The reticle is awesome. If you can read your wind, the reticle will get you on target. I'm not kidding, if you value your hunt, you'll value this scope.
Date published: 2015-09-03
Rated 5 out of 5 by RTO 1 from Range it, breathe, shoot. Mountains of Western North Carolina, 3770 ft altitude. Hunting from a plateau overlooking 4 other fields. 4 deer arrive at 15 minutes before close of legal daylight. Range at 397 yards shooting from a steady rest, 150 ft elevation drop, no wind to speak of. AR-10, 20" BBL and Hornady 165 SST cartridges. 1 shot, the deer finished 20 yards away. 2 deer scatter, 1 remained. Re-ranged at 370 yds, 1 shot, dropped in place. I thank the scope's push-button capability for follow-up efficiency and accurate trajectory compensation. I highly recommend this scope.
Date published: 2017-01-16
Rated 5 out of 5 by Brushoakie from Carefully selected purchase. The quality of this scope is quite good! I mounted it on the rail and tested at 100 yards. I was 30 inches low. I rechecked the mount and discovered an excessive gap at the front of the mount. This was due to the ceracoat on the rail. I dressed the high spot out and remounted the scope. On steel at 100 yards first shot! zeroed at 100 and the target pictured is at 751 yards in a crosswind. This was my first shot at 751 yards. EVER. This will only get better. The pressure required to activate the ranging button is high enough that it will throw you off at distance. Need to be lower of adjustable. The ballistic drop cheat sheet is far from comprehensive . Burris needs to continue to add to the list..(hint) Aguila 7.62x51 fmjbt. I consider this a lifetime purchase. You wont be sorry.
Date published: 2015-04-25
Rated 4 out of 5 by JosephW from Great Scope!! My Browning A-bolt chambered in 7mm Rem Mag has had a Burris Signature 3x9-40 on it for 26yrs and is now serving duty on my fathers old Remington CDL 700 chambered in 7mm Rem Mag. In any case when it was time to replace it, I had completed nearly 2yrs of reading forums and reviews on the Burris Eliminator lll which prompted me to purchase one to install on my Browning 7mm. I have since used this rifle and scope combination for the past 3yrs off the bench at my local range which has target bunkers installed from 100yrds to 600yrds. Off the bench shooting Premium factory ammunition by Federal, Hornady, & Winchester. Shooting this ammunition from my rig has allowed me to hit every target on the range from under 1 1/2" groups on the 100yrd targets out through the range on 8" steel plates hitting each consecutively, even on windy days using the winds advice given in the scope during ranging. In addition to shooting from the bench I have hunted BEAR, COYOTE, MULE & WHITETAIL DEER, MOOSE, & ELK throughout ALBERTA CANADA in the fall with temperatures fluctuating between +10 F to well below -20 F. I have adjusted the ballistic coefficient on this scope for 5 different loads, made 100's of range requests through sleet, snow, & fog yet have not needed to replace the battery. Albeit, ranging targets in adverse conditions is certainly not absolutely fool proof, but it performs well enough to satifiy my expectations from a scope and rangefinder. This scope has served me very, very well & my only criticism is the optics are not as clear as I initially desired & that the remote activation switch introduced on previous models and on the newest Eliminator lll does not retrofit onto my older Eliminator lll.
Date published: 2016-12-02
Rated 5 out of 5 by Steph from Spot On!!! I bought my Eliminator III 4-16x50mm in March 2015. I struggled to get the bullet drop correct, but as many other I did not read the Manual completely. After reading that the easiest is to physically measure the drop over 750 Yards. All my calculations fell into place. What a awesome feeling to hit the target every time over 750 Yards. Something I never thought possible. My first shot in the field landed a 208 Pound Gemsbok Bull. Amazing feeling, one of my best Lifetime buys. Thanks Burris for a magnificent piece of equipment.
Date published: 2015-09-02
WHAT DO I NEED TO RAISE TIS SCOPE FOR A RUGER AR 15
1/2" picatinny riser.
Date published: 2021-06-14
I have the Eliminator III. I’d like to get the remote cable or the wireless for it. Is there a kit or something I could get for mine to add the remote cable?
If it did not come with the remote cable, it will not accept it. Only one model came with that and the other ones are not able to be adapted unfortunately.
Date published: 2021-06-07
Does the scope work at night
The scope itself will perform as an optic but at night you will lose rangefinding capabilities.
Date published: 2021-05-24
Does your ballistic calculator include 6.5 PRC I'm interested to see if your data base includes, 140, 143 and 147 gr bullet data
Yes they're fully compatible with the 6.5 PRC
Date published: 2021-05-24
Does the Eliminator IV have sensors to include calculations for density-altitude and/or air temp and pressure? This is the only thing about my E-III’s that I found lacking ... THX
Hello, It is all calculated here: https://www.burrisoptics.com/ballistics#:1
Date published: 2021-05-03
hi, I'm looking for Eliminator IV Laser Scope 4-16x50mm to buy in Sydney Australia do you have a dealer in Australia that sells this product? if not, do you ship to Australia? kind regards Sam
You will want to contact Beretta Australia. BERETTA AUSTRALIA PTY LTD PO Box 4258 3164 Dandenong South Telephone: +61 3 9799 510 Telefax: +61 3 9799 5199 email: firstname.lastname@example.org www.berettaaustralia.com.au
Date published: 2021-04-27
Can I use eliminator 4 for pcp air guns such as fx impact with good bc slugs and speed up to 1000fps
Hello, None of the Eliminators are compatible with air guns.
Date published: 2021-04-27
Can the eliminator IV be set up for the .300 PRC rounds?
Date published: 2021-04-21